Maintenance method of poultry slaughtering equipment:
1. First level maintenance (weekly) is an indirect preventive maintenance form, which is mainly based on regular inspection and supplemented by maintenance overhaul. According to the working state and working environment of the equipment, it shall be carried out about once a week. Its main work includes: checking, cleaning and adjusting the automatic line transmission mechanism and parts of the conveyor belt; Check the oil pump, dredge the oil circuit, and check the oil quality and quantity of the oil tank; Remove burrs on all moving surfaces; Check and adjust all indicating instruments and safety protection devices; If any hidden trouble or abnormality is found, it shall be eliminated and the leakage shall be eliminated.
2. Level II maintenance (monthly) is a maintenance form mainly to maintain the technical status of the equipment. The workload of level II maintenance is part of the repair and minor repair, and also part of the intermediate repair. It is mainly to repair or replace the wear and damage of vulnerable parts of the equipment.
3. Three level maintenance (major overhaul of equipment twice a year) in order to standardize the three-level maintenance of equipment, the branches shall, in August and the Spring Festival, make use of the off-season production according to the wear condition, performance, accuracy degradation degree and the possibility of failure of all parts and components of the equipment, and formulate the maintenance contents and plans, replacement parts schedule and maintenance cost estimates of all equipment according to the service conditions of the equipment, It shall be reported to the Construction Department of the company for review and summary and implemented after being approved by the general manager. The maintenance content includes all the contents of level II maintenance and the equipment that needs to be stopped for maintenance. All records of equipment maintenance shall be reported to the Construction Department of the company for filing.
4. Regular maintenance (verification and maintenance of special equipment) regular verification and maintenance of special equipment and facilities. According to the relevant verification and inspection cycle regulations of equipment and facilities, periodic verification and inspection are carried out annually (or 6 months) for boilers, pressure vessels, safety valves, pressure gauges, lifting equipment, high-voltage electrical appliances and weighing instruments. The verification and inspection is mainly carried out by qualified units, When special equipment needs to be repaired due to failure, technicians shall be organized to participate in the maintenance according to relevant technical regulations. If there is no technician or no qualification, units and technicians with resources shall be invited to repair it, and all user units shall cooperate to ensure the safe and accurate operation of equipment and facilities.
1. First level maintenance (weekly) is an indirect preventive maintenance form, which is mainly based on regular inspection and supplemented by maintenance overhaul. According to the working state and working environment of the equipment, it shall be carried out about once a week. Its main work includes: checking, cleaning and adjusting the automatic line transmission mechanism and parts of the conveyor belt; Check the oil pump, dredge the oil circuit, and check the oil quality and quantity of the oil tank; Remove burrs on all moving surfaces; Check and adjust all indicating instruments and safety protection devices; If any hidden trouble or abnormality is found, it shall be eliminated and the leakage shall be eliminated.
2. Level II maintenance (monthly) is a maintenance form mainly to maintain the technical status of the equipment. The workload of level II maintenance is part of the repair and minor repair, and also part of the intermediate repair. It is mainly to repair or replace the wear and damage of vulnerable parts of the equipment.
3. Three level maintenance (major overhaul of equipment twice a year) in order to standardize the three-level maintenance of equipment, the branches shall, in August and the Spring Festival, make use of the off-season production according to the wear condition, performance, accuracy degradation degree and the possibility of failure of all parts and components of the equipment, and formulate the maintenance contents and plans, replacement parts schedule and maintenance cost estimates of all equipment according to the service conditions of the equipment, It shall be reported to the Construction Department of the company for review and summary and implemented after being approved by the general manager. The maintenance content includes all the contents of level II maintenance and the equipment that needs to be stopped for maintenance. All records of equipment maintenance shall be reported to the Construction Department of the company for filing.
4. Regular maintenance (verification and maintenance of special equipment) regular verification and maintenance of special equipment and facilities. According to the relevant verification and inspection cycle regulations of equipment and facilities, periodic verification and inspection are carried out annually (or 6 months) for boilers, pressure vessels, safety valves, pressure gauges, lifting equipment, high-voltage electrical appliances and weighing instruments. The verification and inspection is mainly carried out by qualified units, When special equipment needs to be repaired due to failure, technicians shall be organized to participate in the maintenance according to relevant technical regulations. If there is no technician or no qualification, units and technicians with resources shall be invited to repair it, and all user units shall cooperate to ensure the safe and accurate operation of equipment and facilities.